Measurement guide

The wall calculator

Enter the wall size and we will add the production allowance automatically: 4 inches on every edge, meaning 8 inches total to both width and height.

Measure your wall

Do one wall at a time, or set the wall count when several walls share the same dimensions.

Units

# of walls (same size)

Wall width

Wall height

Doors

Windows

Most installers hang full-height material and trim around openings. Leave this unchecked unless the opening is unusually large.

Measured wall area

Production allowance

Adjusted wall size

Square feet to order

Panel count is intentionally not shown. Usable finished width varies by material and production setup, so the studio determines the final panel layout after the order is placed.

Enter a wall width and height to see your results.

How the allowance works

Every wall gets 4 extra inches on each edge.

A 10 ft × 8 ft wall becomes 10 ft 8 in × 8 ft 8 in for production. That adjusted area is rounded up to the next whole square foot for Shopify quantity.

There is no minimum order. The selected material price per square foot determines the checkout total.

Why panel count is not promised Most materials begin near 54 inches wide, but the finished usable width can change with trimming, overlap, material behavior and the production file. The panel layout is finalized after the material is selected.

How to measure well

Measure each wall at its widest width and tallest height, including bump-outs. If walls differ, calculate them separately and add the results. The calculator handles the trim allowance automatically.

What Shopify receives

Measured dimensions — the wall width, height and wall count you entered.
Production allowance — 4 inches on every edge.
Adjusted square footage — rounded up to a whole number and used as Shopify quantity.
Material and design — attached to the order through the correct Shopify variant.